GDS® Hardwire Charger with mUSB Plug and Type-A Port
Leveraging the USB 2.0 OTG mode, the RAM-GDS-CHARGE-OTGAU adapter enables phones and tablets to charge and utilize the OTG accessory mode at the same time. This allows for the use of accessories such as keyboards, a mouse, USB 2.0 Flash drive, barcode scanners, printers, and other devices supported in the USB-IF OTG specification. Eliminating the need for a separate charger, the adapter allows the tablet to be in both host mode and accept a charge of up to 1.67A (at ~5V). The internal charger supports USB 2.0 BC1.2 mode as a DCP mode charger to the host device. The adapter solves the desire to support peripherals and charge through the single Micro-USB port on the host device.
Tablet Compatibility1
- Samsung Galaxy Tab A (8.0", 9.7", 10.1")
- Samsung Galaxy Tab E (8.0")2
- Samsung Galaxy Tab E (9.6")
- Samsung Galaxy Tab S2 (8.0", 9.7")
- Samsung Galaxy Tab 4 (8.0", 10.1")
- Samsung Galaxy Tab S (8.4", 10.5")
1This list is not complete, yet contains tablets that have been tested. There might be changes or previous / subsequent modifications made by the OEM to the listed product that might reduce or eliminate compatibility without notice.
2Supports up to the SM-T377W
Specs & Features
| Input Range | 8V - 40V DC |
| Output Voltage | 5VDC |
| Output Current | 2.5A max |
| Output Connector Types | Male Micro-USB |
| Input Cable Length | 1.2 meters |
| Output Cable Length | 1 Meter |
| Operating Temperature Range | -30°C to 70°C |
| Storage Temperature Range | -40°C to 85°C |
| Overvoltage Protection (OVP)/Load Dump Compliance | Meets SAE J-1113 |
| Other |
|
