Regions: Rest of the World (APAC, EMEA, and Oceania) Bands: 1, 3, 5, 7 8, 20, 26, 28L
Perfect for nomadic applications, CEL-FI ROAM R41 is a plug-and-play cellular coverage solution that keeps people connected on the water or road. Whether you’re making calls during your cross-country road trip, streaming music on your weekend boating adventures, or have a fleet that requires cellular connectivity, ROAM R41 ensures you have reliable voice and data in transit. Suitable replacement for GO G31 and GO G32 (mobile systems).
Improve Your Coverage In Minutes
With enterprise-grade performance and its easy-to-install design, CEL-FI ROAM R41 can be set up, powered on, and improve cellular connectivity in no time. Whether you’re in a car, truck, RV, or boat, ROAM R41 will keep you connected when you’re on the move.
The system’s low-profile design allows you to install it discretely under any seat, while its rugged frame offers trusted durability, so people and crews can keep their connection – improving productivity and safety.
Choose Your Carrier
ROAM R41 is compatible with a wide range of bands to give you peace of mind that the system will boost your carrier’s signal. And if your friends or family use a different mobile network operator, through the Nextivity WAVE App you can easily switch what carrier to boost depending on location and coverage challenges.
Unmatched Performance
Equipped with the latest 4th generation Nextivity proprietary IntelliBoost chip, ROAM R41 features the same technology that is used in our enterprise cellular coverage solutions. This gives you industry-leading signal gain that ensures you can always make a call, send a text, listen to music, or stay on the right route while in your car or boat.
Does the R41 support Vodafone's 700 High Band?
No R41 unfortunately only supports the lower portion of the 700MHz band, so is suited to Telstra and Optus for this band.
Can I use the R41 for Stationary Building Applications
ROAM R41 was designed for vehicle applications so the coverage area is expected to be in and around your vehicle. However, there is nothing stopping you purchasing a mains power supply and using it to cover a room or two in your home or office. If connected to an external server antenna, coverage up to 200m² is supported with 100% isolation between donor and server antennas.
Does the R41 support Carrier Switching?
Yes ROAM R41 supports carrier switching. This will enable you to switch between Telstra, Optus and Vodafone once operators have approved the product.
Can I power R41 from 24V?
No only 12V is supported (with a 11.5 15V range). You can use a Victron 24 12V down converter for 24V usage (sold separately).
What does Band 26 support offer?
The ROAM R41 supports the future 850MHz (B26) expansion band. This will enable Telstra to offer possible 5G coverage to rural and marginal areas from 1 st July 2024, when the 3G network is turned off and the spectrum can be used.
Do I need to ground the R41?
Whilst the R41 power socket has a cable to ground, it is highly recommended to use the grounding point to earth the casing. Each vehicle install is different and by using a grounding cable you will be protecting and extending the life of the product.
What does the higher uplink power mean?
Compared to the GO G31 Mobile the new R41 has up to 60% more uplink power. Often your phone has signal, but cannot communicate back to the tower, by increasing the uplink power your phone should be able to make a call further away from the cell tower than the G31.
Can I install the R41 outdoors?
ROAM R41 has an IP54 rating, meaning that it is not waterproof and needs to be installed ideally indoors. For outdoor installations a waterproof enclosure can be used, as long the internal temperature remains below 60 C.
