- 12-channel GPS receiver tracks and uses up to 12 satellites for fast, accurate positioning and low power consumption
- Highly accurate measurement pulse output for precise timing measurements: one-pulse-per-second (1 Hz)
- Waterproof design allows continuous exposure to the prevailing weather conditions
The puck-like receiver is 2.4 inches in diameter and weighs just a few ounces, making it an ideal solution for applications where space is at a premium. The non-volatile memory does not require battery backup.
Configurable parameters include expected position, current time and date, and preferred position fix type (3D or Automatic).
Downloads
Size: | 61mm (2.4") in diameter and 19.5mm (0.77") in height |
Weight: | 160g |
Colour: | Black |
Case Material: | Polycarbonate thermoplastic - waterproof to IEC 60529 IPX7 level (immersion in 1 meter of water for 30 minutes) |
Cable Length: | 5 meter |
Input Voltage: | 4.0-5.5 Vdc |
Input Current: | 90 mA @ 5.0 Vdc |
CMOS Serial Output Levels: | 0 Vdc to Vin, between 4 and 5.5 Vdc (Asynchronous Serial, TIA-232-F(RS-232)Compatible Polarity) |
GPS Receiver Sensitivity: | -185 dBW minimum |
Operating Temperature: | -30°C to 80°C (-22°F to 176°F) |
Storage Temperature: | -40°C to 90°C (-40°F to 194°F) |
Reacquisition Time: | Less than 2 seconds |
Acquisition Times: | Hot : Approx. 1 second (all data known) Warm : Approx. 38 seconds (initial position, time, and almanac known; ephemeris unknown) Cold : Approx. 45 seconds |
Update Rate: | 1 record per second |
Interfaces: | TIA-232-F (RS-232) compatible asynchronous receiver. Default setting is 4800 baud. |
Accuracy
Position: | < 15 meters, 95% typical |
Velocity: | 0.1 knot RMS steady state |
Measurement Pulse Output Time: | ± microsecond at rising edge of the pulse |
Dynamics: | 999 knots velocity (only limited at altitude greater than 60,000 feet), 2g dynamics |
Specifications are provided as a guide only, and are subject to change without notice.
- GPS 18x with bare wire connection